HardwarePosLimitTriggerStateSet()

void HardwarePosLimitTriggerStateSet

(

bool

state

)

Description:

HardwarePosLimitTriggerStateSet sets the Hardware Positive Limit to Active High or Active Low.

Parameters

state

1 = triggers on active high signal, 0 = triggers on active low signal.

Part of the Limits and Action Configuration method group.

Sample Code:

Axis: Configuration

    bool ACTIVE_HIGH = true;
    bool ACTIVE_LOW = false;
    double HW_POS_DURATION_TIME = 0.01;  // Positive limit duration (in seconds)
    double HW_NEG_DURATION_TIME = 0.01;  // Negative limit duration (in seconds)
 
    // set pos & neg limits
    axis.HardwarePosLimitActionSet(RSIAction.RSIActionE_STOP);
    axis.HardwarePosLimitTriggerStateSet(ACTIVE_HIGH);
    axis.HardwarePosLimitDurationSet(HW_POS_DURATION_TIME);
 
    axis.HardwareNegLimitActionSet(RSIAction.RSIActionE_STOP);
    axis.HardwareNegLimitTriggerStateSet(ACTIVE_LOW);
    axis.HardwareNegLimitDurationSet(HW_NEG_DURATION_TIME);
 
    // get pos & neg limits
    RSIAction hPosLimAct = axis.HardwarePosLimitActionGet();
    bool hPosLimTrigState = axis.HardwarePosLimitTriggerStateGet();
    double hPosLimDur = axis.HardwarePosLimitDurationGet();
 
    RSIAction hNegLimAct = axis.HardwareNegLimitActionGet();
    bool hNegLimTrigState = axis.HardwareNegLimitTriggerStateGet();
    double hNegLimDur = axis.HardwareNegLimitDurationGet();

RapidSetup:

Go to axis screen->Limits & Actions. In the image below, HardwarePosLimitTriggerStateSet sets the trigger state shown in the Positive (+) Hardware box. It currently triggers on a HIGH because the "High" checkbox is checked.

See also

HardwarePosLimitTriggerStateGet

Examples

AxisConfiguration.cpp, HardwareLimits.cpp, and axis-config-hardware-limits.cs.