RapidWorkbench

Table of Contents

• 🔹 What is RapidWorkbench?
• 🔹 Steps
  • 1. Extract Files
  • 2. Open & Configure RapidWorkbench

A desktop tool that emulates Kollmorgen's Workbench tool for working with AKD servo drives via an EtherCAT network.

🔹 What is RapidWorkbench?

RapidWorkbench is a utility that emulates Kollmorgen's Workbench tool, which allows a user to alter the parameters of the AKD servo drive.

One advantage of RapidWorkbench is the ability to connect to the AKD drive using a standard EtherCAT connection instead of a service port (X11). Once the drive is detected in RapidWorkbench, a user can configure drive settings such as maximum motor current, encoder resolution, I/O scaling, etc.

Note

Customers using Kollmorgen’s Workbench software will still need to connect to the drive using the X11 connector.

🔹 Steps

1. Extract Files

1.1 - Navigate to your RMP folder. (Ex: C:\RSI\10.3.6 your version might be different)

1.2 - Locate the RapidWorkbench.zip file and click "Extract all".

2. Open & Configure RapidWorkbench

2.1 - Run RapidSetup. Then go to Tools **>** RapidWorkbench for AKD.

2.2 - You will be seeing an error like this:

2.3 - Click OK.

2.4 - File Explorer should opened in the RapidWorkbench.zip.

2.5 - Click Extract All.

2.6 - A window similar to the below one should open.

Warning

IMPORTANT

Delete “RapidWorkbench” from the path above, then click Extract. (Note: your RMP version might not be 7.2.6, go to your version folder)

2.7 - Wait for files to transfer 100%.

2.8 - Open RapidWorkbench again. Go to Tools **>** RapidWorkbench for AKD.

2.9 - Some pop-ups may appear. Allow the app to make changes to your device/computer.

2.10 - RapidWorkbench will open.

2.11 - Now, if you are connected to any axes through your AKD drive. Select an Axis. (Note: make sure the RapidSetup network is OPERATIONAL)

Note

To learn more about Workbench, visit Kollmorgen's Workbench Help page.